2600mm Reinforcing Mesh Welding Machine

Mesh Width 2500mm Pneumatic Reinforced Fence Mesh Welding Machine

The reinforced steel bar mesh welding production line is a kind of automatic wire mesh welding equipment.
Line wire pre-cut automatic feeding, cross wire storage automatic feeding, automatic mesh output,stacking alignment, packaging.
Compared with the common wire mesh welding equipment, the automatic wire mesh forming production line uses automatic feeding instead of manual feeding, automatically turning the mesh, catching the mesh, packing instead of manual lifting, placing and tying, which saves the labor

cost and improves the production efficiency

1. Both of the warp wire and weft wire are pre-cut by wire straightening and cutting machine. And line wire will be placed by manual and feeding trolley, cross wire will falling automatically.

2. Servo motor control line wire automatic feeding system

3. The welding power comes from pneumatic, with the advantages of pressure is consistent, stable and easy to adjust.

4. Pulling mesh system uses servo motor, in this case the mesh size is adjustable and accurate.

5. The controlling system adopts Mitsubishi PLC, all the parameters are input by touch screen.

working step description

1. Control system Panasonic PLC automatic control system, combined with Weinview touch screen, can directly input and display equipment operating parameters, intelligent and easy to operate.

2. Weft wire hopper: the stepper motor drives the disk-type device to automatically drop wires, and the hopper has a large capacity of storing wires max up to 1.5 tons. When there is no wire in the hopper, the equipment will automatically stop running.

3. Diameter wire feeding mechanism: Mitsubishi servo motor is equipped with planetary reducer to drive pneumatic compression wire feeding device to send diameter wire to the welding position. The equipment is automatically welded.

4. Mesh pulling mechanism: Mitsubishi servo motor supporting planetary reducer drives pneumatic clamping mesh pulling device to ensure the stability of the system and the standard size of the welded mesh.Automatic reciprocating mesh drawing can realize the production of lengthening size mesh.

5. Water-cooled welding electrodes and a new type of special transformer for water-cooled welding mesh with epoxy resin are adopted, which is smaller in size and higher in safety and reliability than traditional transformers.

6. Low-voltage electrical appliances are made of Schneider, Tianzheng, Mingwei and other well-known brands to ensure the efficient and stable operation of the equipment.

7. The reinforcing mesh welding machine will stop working automatically if there is no cross wires in hopper device.

8. When there is malfunction on the machine, the PLC will alarm, which is convenient to adjust the machine.

9. The cross wire space adjustment adopts PLC micro-computer control, set on the touch screen.

10. The mesh pulling system in cycle is automatically calculated, no need manual setting. The mesh pulling car can be back to origin automatically after finishing the pulling.

11. The reinforcing mesh welding machine is equipped with 13 PCS water cooled transformers. Each welding transformer is 165KVA.

Specifications

machine packing

1. The bracket and auxiliary equipments will be with plastic package, spare parts in carton box.
2. The main machine will be fixed in the container by steel wire rope to make it stable.
3. It needs one 20GP, 40GP or 40"HC for shipment